6S Shaking Table

table

Table mainly by the head of a bed, motor, adjustable slope, bed, ore tank, water tank, a rifle and lubrication systems of eight parts. The bed surface longitudinal reciprocating motion is achieved by a crank connecting rod type transmission mechanism. The electric motor through the belt transmission to make the big belt wheel drives the rotation of a crankshaft, rocker make moves up and down, the rocker moves downward, elbow board and push the rear axle and the reciprocating rod moves backwards, the spring is compressed. The bed surface is connected by a linkage block and a reciprocating lever, so this is also so the bed surface as a backward movement, when the rocker moves upward, due to spring tension pushes forward motion, the bed surface is.

Table installation

To pour cement and embedded anchor bolts before installation. The installation should pay attention to the two must be adjustable slope base radius of 360 mm center with the bed head linkage seat center three in the same plane, or on the bed surface tilt, will wear accelerated copper sleeve, even make the reciprocating rod breakage. As for the linkage seat and the bed surface traction screw height error, can be adjusted to eliminate shaking bolt box under the.

Technical Data

6S Shaking Table
Model and Specification 6-S/LY 6-S/LY 6-S/LY LY
Table Size(mm) Length×Feed width×Concentrate width 4520×1850×1560 3000×1620×1100 2100×1050×850 1100×500×430
Selective are(㎡) 7.67 4.08 2 0.51
Feed size(mm) coarse sand 1-2.5 0.6-1.5 0.4-0.8 0.1-0.2
fine sand 0.8-1.2 0.3-0.8 0.2-0.5 0.05-0.1
slurry 0.3-0.6 0.2-0.4 0.1-0.2 0.03-0.05
Water consumption(t/h) 0.5~3.5 0.3~1.5 0.2~1 0.1~0.5
Stroke(mm) 8~36 10~30 12~28 9~17
Jig frequency(q/m) 240~380 240~420 250~450 280~460
Cross fall(°) 0°~5° 0°~8° 0°~10° 0°~10°
Motor Model Y70L-4 Y100L-4 Y90L-4 Y80L-4
Power(kw) 1.1 1.1 1.1 0.55
Revolving speed(r/min) 1400 1400 1400 1400
V-belt(mm) A-2000 A-1033 B-2007 A-1245
Overall Dimension(Length*Width*Height)mm 5630×1850×900 4075×1320×780 3040×1050×1020 1530×500×800
Weight(kg) 650 550 350 150
Notes: The above technical parameters based on stationary type shaking table, are for your reference only.